Magewell Eco Capture Quad SDI M.2

Four-channel simultaneous capture of SD/HD/3G-SDI signals at up to 2048x1080, via an M.2 2280 (PCIe Gen2 x4) host interface — well suited for space-constrained embedded and mobile deployments

Integrated cable equalizer extends cable reach to 330m for SD-SDI, 190m for HD-SDI and 150m for 3G-SDI, supporting long-distance cabling in the field

Full 10-bit 4:4:4 video processing engine with ~180Mpixels/s per-pipeline bandwidth; supports de-interlacing, scaling, frame-rate conversion and color-space conversion across RGB, YCbCr 601/709/2020 color formats

RGB 4:4:4, YCbCr 4:4:4 and YCbCr 4:2:2 color sampling at 10/12-bit color depth; capture quantization range (Limited/Full) and saturation range (Limited/Full/Extended Gamut) are independently selectable

Up to 8 (mono) audio channels per input at 48KHz, with extraction of audio format information and channel status data; Closed Caption capture supported via SDK

SG-DMA video transfer at ~400MB/s per channel in PCIe 2.x, with auto detection of Intel tiled GPU surfaces, AMD DirectGMA and Nvidia GPUDirect

Hardware 100ns high-resolution clock timestamps both audio frames (192 samples) and video frames; clock can be synchronized across cards via SDK for precise A/V sync

On-board 16-position dip switch sets card number, allowing multiple cards in one system; device tree and software device names both display the card number for easy identification

Unlimited capture streams from any single input channel; all streams on the same channel must share the same capture format

Online firmware upgrade without system shutdown; multiple cards in one system can be upgraded simultaneously; safe-upgrade auto-recovery restores the previous version if power loss or system failure occurs during upgrade; status LEDs indicate per-channel signal lock, memory failure or FPGA configuration failure